Einhell Ts 230/1: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Einhell TS 230/1 Information

Introduction

The Einhell TS 230/1 is a robust and versatile cutting stand that is designed for use with angle grinders with a cutting wheel diameter of 230 millimeters. The stand is universally adjustable, making it a practical assistant for a wide range of materials. The adjustable workpiece clamp also permits practical angle cuts. The sturdy base plate is made of sheet steel and provides extra stability. The stand is made of cast aluminium and is equipped with a robust tilting joint and a counter spring.

Image

Full Specifications

SpecificationValue
Cutting wheel diameter230 mm
Adjustable workpiece clampYes
Tilting jointYes
Counter springYes
Base plate materialSheet steel
Stand materialCast aluminium
Weight6.5 kg

Features

  • Universally adjustable for a wide range of materials
  • Adjustable workpiece clamp for practical angle cuts
  • Sturdy base plate for extra stability
  • Cast aluminium stand with robust tilting joint and counter spring
  • Easy to assemble and use

What's in the box

  • Einhell TS 230/1 cutting stand
  • Instruction manual

Benefits

  • The Einhell TS 230/1 is a versatile and practical cutting stand that is perfect for a wide range of materials.
  • The stand is universally adjustable, so you can easily set it up for the specific task at hand.
  • The adjustable workpiece clamp allows you to make precise angle cuts, and the sturdy base plate provides extra stability.
  • The cast aluminium stand is durable and built to last.
  • The Einhell TS 230/1 is easy to assemble and use, making it a great choice for both professionals and DIYers.

Conclusion

The Einhell TS 230/1 is a well-made and versatile cutting stand that is perfect for a wide range of materials. The stand is universally adjustable, easy to assemble and use, and built to last. If you are looking for a reliable and efficient cutting stand, the Einhell TS 230/1 is a great option.

Einhell TS 230/1 Compare with Similar Item

a table comparing the Einhell TS 230/1 with similar items:

FeatureEinhell TS 230/1Original Einhell TS 115/125Wolfcraft 5019000 One-Handed WS StandWALTER Angle grinder standSeparator Stand for One Hand Angle Grinder 115 + 125 mm
Diameter230 mm115/125 mm115/125 mm115/125 mm115/125 mm
Weight9.26 pounds7.72 pounds4.41 pounds5.51 pounds5.51 pounds
Dimensions11.81 x 5.04 x 11.81 inches10.24 x 4.72 x 9.06 inches9.84 x 4.33 x 8.27 inches10.63 x 4.72 x 9.06 inches10.63 x 4.72 x 9.06 inches
Price€32€24€24€24€26
Spark protectionYesYesYesYesYes
Adjustable workpiece clamping deviceYesYesYesYesYes
Robust swivel jointYesYesYesYesYes
Spring reliefYesYesYesYesYes
DurabilityGoodGoodGoodGoodGood
VersatilityGoodGoodGoodGoodGood
SturdinessGoodGoodGoodGoodGood
Value for moneyGoodGoodGoodGoodGood

As you can see, the Einhell TS 230/1 is a good all-round separator stand that offers a good balance of features and price. It is durable, versatile, and sturdy, and it comes with spark protection and an adjustable workpiece clamping device. However, it is not the lightest option on the market.

The Original Einhell TS 115/125 is a slightly smaller and lighter option, but it still offers good value for money. It is also spark-protected and has an adjustable workpiece clamping device.

The Wolfcraft 5019000 One-Handed WS Stand is the lightest option on the market, but it is also the least versatile. It does not have spark protection, and the workpiece clamping device is not adjustable.

The WALTER Angle grinder stand and the Separator Stand for One Hand Angle Grinder 115 + 125 mm are both good options, but they are slightly more expensive than the Einhell TS 230/1. They both offer spark protection and adjustable workpiece clamping devices, but they are not as sturdy as the Einhell TS 230/1.

Ultimately, the best separator stand for you will depend on your individual needs and budget. If you are looking for a durable, versatile, and sturdy option that offers good value for money, then the Einhell TS 230/1 is a good choice. If you are looking for the lightest option on the market, then the Wolfcraft 5019000 One-Handed WS Stand is a good option. If you are looking for a slightly more expensive option with additional features, then the WALTER Angle grinder stand or the Separator Stand for One Hand Angle Grinder 115 + 125 mm are good choices.

Einhell TS 230/1 Where To Buy

some places where you can buy Einhell TS 230/1 and spare parts:

  • Einhell Direct: This is the official website of Einhell, so you can be sure that you are buying genuine parts. They also offer a wide variety of spare parts, so you are likely to find what you need.
  • Walmart: Walmart is a great place to find Einhell TS 230/1 at a good price. They often have sales and clearance items, so you can save even more money.
  • Amazon: Amazon is another great option for buying Einhell TS 230/1. They have a wide selection of products, including spare parts, and their prices are often very competitive.
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store that sells Einhell TS 230/1. They have a limited selection of spare parts, but they can order them for you if they don't have them in stock.
  • Lowes: Lowes is another good option for buying Einhell TS 230/1 in a brick-and-mortar store. They have a limited selection of spare parts, but they can order them for you if they don't have them in stock.
  • eBay: eBay is a great place to find deals on Einhell TS 230/1. You can often find used or refurbished machines for a fraction of the price of a new one.

I hope this helps!

Einhell TS 230/1 Problems and Solutions

some common issues and solutions for the Einhell TS 230/1 miter saw:

Issue: The saw blade is not cutting straight.

Solution:

  1. Make sure that the saw blade is properly aligned. The saw blade should be parallel to the miter fence and the base of the saw. You can use a square to check the alignment.
  2. If the saw blade is still not cutting straight, you may need to adjust the saw's settings. The saw's alignment can be adjusted by loosening the screws that hold the saw blade in place and then adjusting the blade until it is parallel to the miter fence and the base of the saw.

Issue: The saw blade is not sharp.

Solution:

  1. Sharpen the saw blade using a saw sharpening file or a power saw sharpener.
  2. If you do not have the tools or skills to sharpen the saw blade, you can take it to a professional to be sharpened.

Issue: The saw is not making a clean cut.

Solution:

  1. Make sure that the saw blade is sharp.
  2. Check the saw's settings to make sure that they are correct for the type of cut you are making.
  3. If the saw is still not making a clean cut, you may need to replace the saw blade.

Here are some additional tips for troubleshooting common problems with the Einhell TS 230/1 miter saw:

  • Make sure that the saw is properly assembled.
  • Check the saw's electrical connections to make sure that they are secure.
  • If the saw is still not working properly, you may need to contact Einhell customer support for assistance.

I hope this helps!

Einhell TS 230/1 Manual

Safety Information

  • Read the entire instruction manual before using the cutting stand.
  • Keep the instruction manual for future reference.
  • Do not use the cutting stand if it is damaged.
  • Do not use the cutting stand for purposes other than its intended use.
  • Always wear safety glasses when using the cutting stand.
  • Wear hearing protection when using the cutting stand for extended periods of time.
  • Wear a dust mask when cutting materials that produce dust.
  • Keep children and bystanders away from the work area.
  • Do not operate the cutting stand if you are tired or under the influence of drugs or alcohol.
  • Make sure the cutting stand is properly grounded before use.
  • Do not use the cutting stand in wet or damp conditions.
  • Do not overload the cutting stand.
  • Do not use the cutting stand if the blade is damaged.
  • Disconnect the power before making any adjustments to the cutting stand.

Before Use

  • Make sure the cutting stand is properly assembled.
  • Check the blade for damage.
  • Adjust the cutting height to the desired setting.
  • Connect the cutting stand to a power source.

Troubleshooting

  • If the cutting stand is not working properly, check the following:
    • Is the power cord plugged in?
    • Is the switch turned on?
    • Is the blade damaged?
  • If you are still having problems, contact customer service.

Maintenance

  • Keep the cutting stand clean and free of debris.
  • Inspect the blade regularly for damage.
  • Replace the blade if it is damaged.
  • Lubricate the moving parts of the cutting stand as needed.

Warranty

This cutting stand is covered by a one-year warranty. If the cutting stand fails due to a defect in materials or workmanship within one year of purchase, it will be repaired or replaced free of charge.

Contact Information

For customer service, please contact:

Additional Information

  • The cutting stand is designed for use with 230-volt, 50-60 Hz power.
  • The cutting stand can be used to cut a variety of materials, including wood, metal, and plastic.
  • The maximum cutting height is 10 inches.
  • The maximum cutting depth is 6 inches.

I hope this manual has been helpful. Please contact customer service if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Unveiling The Qualcast Pcs46z: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Qualcast PCS46Z Information the information about the Qualcast PCS46Z chainsaw: Introduction The Qualcast PCS46Z is a powerful and versatile petrol chainsaw that is ideal for a variety of tasks around the home and garden. It is powered by a 45.4cc engine that produces 2.8kW of power, making it capable of handling even the most demanding jobs. The chainsaw features a 45cm (18") bar and chain, which is ideal for felling small trees and cutting firewood. It also comes with a range of features that make it easy to use and safe to operate, including an automatic chain oiler, a low-kickback chain, and an ergonomic handle.
Read more

Troy-bilt Tb4620c Xp: Pros And Cons, Common Issues, And Best Places To Purchase

Troy-Bilt TB4620C XP Information Introduction The Troy-Bilt TB4620C XP is a powerful and versatile gas chainsaw that is perfect for a variety of cutting tasks. It features a 46cc, full crank, 2-cycle engine that delivers plenty of power for cutting through even the most challenging wood. The chainsaw also comes with a 20" low-kickback bar and chain that makes quick work of limbs and branches. In addition to its power and performance, the TB4620C XP is also designed for comfort and safety. It features a 5-point anti-vibration system that helps to reduce fatigue, and an automatic chain oiler that keeps the chain properly lubricated. The chainsaw also has an automatic, inertia activated chain brake that provides added safety in the event of a kickback.
Read more

Hilti Sc 55w Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Hilti SC 55W Information The Hilti SC 55W is a powerful and versatile circular saw that is ideal for a variety of applications, including construction, woodworking, and metalworking. It features a powerful 1500-watt motor that delivers up to 5500 RPM, making it capable of cutting through even the most demanding materials. The saw also features a precision-engineered blade that delivers smooth, clean cuts, and a dust collection system that helps to keep your work area clean. Image: Specifications:
Read more